If you aim to avoid any audible loss of quality by using a high quality adapter cable in the studio or on stage and want to split, e.g. an audio signal to 2 power amps or for the use with in-ear systems, you will find the best solution in our CFY FMM Y-adapter with 1x female XLR to 2x male XLR connectors.
The REAN made by Neutrik® connectors are assembled by hand. The wire cross-section is 2x 0.22mm² and at both ends the splits are approx. 15 cm long.
| cable | essentials cable 1 | |
| Jacket | PVC | |
| cable assign | FMM | |
| connector brand | REAN ® | |
| plugs |
1x XLR female 3-pole
2x XLR male 3-pole
|
| Conductor area | 0.22 mm² |
| AWG | AWG 24 |
| Composition of conductor | 28 x 0.10 mm |
| Material | bare copper |
| Conductor resistance | < 80 Ohm/km |
| Shielding | spiral shield (90% coverage) |
| Capacity cond.-cond. (pF/m) | < 80 pF/m |
| category | Y-Adapter |
| diameter | 5.9 ± 0.2 mm |
| Conductor isolation | LDPE |
| Colour | Length | Matchcode | item no. |
| 0.30 | CFY 0.3 FMM | 10607 |
