Microphone
elements

EM MP

New

The EM MP is used to connect a mono signal (from for example a guitar) to the XLR input of, for example, a mixer or audio workstation. The robust male XLR connector with nickel-plated contacts and molded bend protection combined with the metal mono jack and a durable PVC jacket withstand even the toughest conditions. Pin 1 and 3 are combined in the mono plug so that no signal strength is lost. The transmission is therefore unbalanced.

The conductor area of 2x 0.22 mm² and shielding of twisted copper strands (spiral shielding, 95% coverage) ensure crystal-clear and unaltered signal transmission. The single-strand construction (28 x 0.10 mm) and the robust but flexible PVC sheathing compound ensure a particularly flexible XLR cable that is easy to wind.

Also available as EM FP with a female XLR connector.

Product information
cable elements MIC 1
Jacket PVC
cable assign MP
connector brand -
plugs
1x XLR male 3-pole
1x 1/4" Plug mono
technical data
Technical facts
Conductor area 0.22 mm²
AWG AWG 24
Composition of conductor 28 x 0.10 mm
Material bare copper
Conductor resistance 80 Ohm/km
Shielding Spiral wound copper wire (spiral shield, 95% coverage)
Capacity cond.-cond. (pF/m) 58 pF/m
category Microphone
diameter 6.0 mm
Conductor isolation PE
Lenghts & colours
Colour Length Matchcode item no.
5.00 EM 5 MP 14753
10.00 EM 10 MP 14754
International Sales Manager
Benedikt Schmidt
Head of Sales & Marketing
Christian Langer
International Sales Manager
Christine Kärger