Data
encore

CSE HH 7A LONG-RUN-SD

When it comes to on-stage usage, the NEUTRIK etherCON connector is the standard for RJ45 connectors due to its outstanding mechanical properties. However, there are devices that are often used in productions which are not compatible with this connector due to its protective metal sleeve.

With the CSE HH 7A LONG-RUN-SD cable drum variant, CORDIAL provides the solution to this problem, as this off-the-shelf cable is equipped with the universally usable CAT 7A RJ45 connector by the renowned Telegärtner industrial brand. This connector comes from the “Industrial Ethernet” segment and has the same electrical properties as the etherCON but can be put to use in the tightest of spaces, for example when plugged into network switches or PCs/MACs. A further bonus comes in the form of the pre-mounted protective cap on the Telegärtner RJ45 connector.

The CSE HH 7A LONG-RUN-SD supports Power Over Ethernet (POE+) in accordance with IEEE202.3at (25.5 W power).

In addition, the CSE HH 7A LONG-RUN-SD is made up by-the-meter of the high load-bearing CCAT 7A LONG-RUN with AWG 23/7, wound onto a particularly break-proof GT 380 drum developed by Schill, and encased in a PUR sheathe. The PUR sheathing provides further benefits: the network cable can be used both indoors and outdoors and is also halogen-free and flame-retardant.

This makes the CSE HH 7A LONG-RUN-SD a special data cable that effortlessly copes with virtually any application-related challenge and can fit into almost any device.

It can also be used for data transfer with the lower category cables CAT.5e, CAT.6, CAT.6A, and CAT.7.

Product information
cable CCAT 7A LONG-RUN
cable assign HH
plug
1 RJ 45
1 RJ 45
Specifications / Tender
Technical facts
Conductor area 0.26 mm²
AWG AWG 23
Composition of conductor 8 x 7 x 0.23
Material bare copper
Conductor resistance 80 Ohm/km
Shielding S/FTP
Capacity cond.-cond. (pF/m) 45 pF/m
Conductor area 0.26 mm²
AWG AWG 23
Composition of conductor 8 x 7 x 0.23
Material bare copper
Conductor resistance 80 Ohm/km
Shielding S/FTP
Capacity cond.-cond. (pF/m) 45 pF/m
Product variants
Length Colour Part number
50.00 CSE 50 HH 7A LONG-RUN-SD
75.00 CSE 75 HH 7A LONG-RUN-SD
100.00 CSE 100 HH 7A LONG-RUN-SD
125.00 CSE 125 HH 7A LONG-RUN-SD
150.00 CSE 150 HH 7A LONG-RUN-SD
Sales consultant
Franky Kolken
Sales consultant
Regina Tegel
Sales consultant DACH
Thomas Murawski
Technical support
Günter Schäfer